8015344.021518.E
8015343.021518.F
Service Manual
Table of Contents
Section Code Section Page Number
1 Important Safety Instructions 2
1 Safety Warning Labels and Serial Number 3
1 Specications 4
1 Moving and Storing the Machine 5
1 Leveling the Machine 5
1 Connectivity 6
1 Maintenance 7
1 Maintenance Parts Exploded View 8
1 Troubleshooting 10
1 Machine Settings Mode 11
1 Replacement Procedure Skill Level 12
Mechanical/ModicationProcedures
2 Adjust Ropes 13
3 Install Platform Decking Shim 15
4 Install Shaft Spacer 19
5 Reset the Console 22
6 Update the Firmware 23
Part Replacement
7 Replace the Brake Assembly 27
8 Replace the Brake Disc 32
9 Replace the Console Bezel Assembly 37
10 Replace the Console Cable Assembly 40
11 Replace the Deep V Pulleys 43
12 Replace the Elastic Cord (Bungee) 51
13 Replace the Fan Assembly 59
14 Replace the Floating Pulley 63
15 Replace the Frame Assembly 67
16 Replace the Front Platform Frame 77
17 Replace the Load-Bearing Floating Pulley 81
18 Replace the Lower Chassis Cable 86
19 Replace the Lower Left Rope 91
20 Replace the Lower Right Rope 99
21 Replace the Low-Tension Floating Pulley 107
22 Replace the Middle Pulley Arm 112
23 Replace the Plain Bearing Pulley 117
24 Replace the Platform Decking 121
25 Replace the Platform Frame 125
26 Replace the Power Inlet 132
27 Replace the Servo Motor 135
28 Secure the Servo Motor 141
29 Replace the Speed Sensor Assembly 147
30 Replace an Upper Pulley Retainer 153
31 Replace an Upper Rope 156
Nautilus, Inc., www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed in China | © 2017 Nautilus, Inc. | ® indicates
trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Bowflex, the B logo, and HVT are trademarks owned by or licensed to Nautilus,
Inc.
Bowflex
®
HVT
™
machine
Service Manual
To Next Page
Need help?
General
