Bowflex HVT - Page 39

39
7.CarefullyiptheConsoleAssemblyover,holdingtheConsole
Bezel Assembly in place on the Console Assembly.
8. Slightly lift the Console Bezel Assembly and disconnect the Con-
sole Cable.
9. Remove the old Console Bezel Assembly and replace with the new
one.
10. Re-assemble the machine in the reverse order of when the parts
were removed.
11. Final Inspection
Inspect your machine to ensure that all hardware is tight and compo-
nents are properly assembled.
Do not use until the machine has been fully assembled
and inspected for correct performance in accordance
with the Owner’s Manual.