Bowflex HVT - Page 82

82
1. Unplug the AC Adapter from the wall outlet and machine.
2. Using a #2 Phillips screwdriver, remove the six indicated (by white
ovals) screws from the Console Assembly.
Note: Be prepared to support the Console Assembly.
3. Slightly remove the Console Assembly to expose the Console Cable.
Note: Be sure not to crimp the cable by supporting the Console Assem-
bly.
4. Disconnect the Console Cable from the Lower Cable and safely place
the Console Assembly out of the work area.
5. Using a #2 Phillips screwdriver, remove the four indicated screws from
the Fan Assembly Shroud.
Console Cable
Lower Cable
Console Assembly
Fan Assembly Shroud