Bowflex HVT - Page 84

84
Right Rope
Stopper
(removed)
7. To reduce the tension on the ropes, pinch the clips together on top
of the appropriate Rope Stopper and pull it out from below.
Right Rope Stopper
Left Rope Stopper
8. Remove the Rope Stopper from the rope, and pull the end of the rope through the frame.
9. Re-attach the Rope Stopper to the end of the rope to keep it from being released any further.
10. Using a 6mm hex wrench, remove the appropriate Pulley to release the rope from the Float-
ing Pulley.
Note: Be sure to note the routing of the rope before removing the Pulley.