Bowflex Max Trainer M3 - Leveling the Machine; Moving the Machine

4
Moving the Machine
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and
others are all physically t and able to move the machine safely.
1. Grasp the inner, unmoving part of the Pivot Assembly to carefully tilt the machine
toward you onto the transport rollers.
Be aware of the Handlebars and the weight of the machine before tilting
the machine.
2. Push the machine into position.
3. Carefully lower the machine into position.
NOTICE: Be careful when you move the machine. All abrupt motions can affect the
computer operation.
Leveling the Machine
ThemachineneedstobeleveledifyourworkoutareaisunevenoriftheRailAssemblyisslightlyofftheoor.Toadjust:
1. Place the machine in your workout area.
2. Loosenthelockingnutsandadjustthelevelersuntiltheyareevenlybalancedincontactwiththeoor.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to the machine
can occur.
3. Tighten the locking nuts.
Make sure the machine is level and stable before you exercise.