Bowflex Max Trainer M3 - Fitness Basics and Guidance; Exercise Frequency and Consistency; Appropriate Apparel

To Next Page

To Previous Page

Reset the Console on the Bowﬂex

Max Trainer

M3 / M5

Skill Level: I

8006639.081517.D

Service Procedure

NOTICE: ThisdocumentprovidesinstructionstoresettheConsoletothemanufacturedsettingsontheBowexMaxTrainer

M3 / M5. Be aware that all infor-

mation will be erased on the Console.

If you need assistance, please call Bowﬂex Customer Service at 1-800-605-3369.

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause

injury to the service technician or bystanders.

• Keep bystanders and children away from the product being serviced at all times.

•Makesurethattherepairisdoneinanappropriateworkspaceawayfromfoottrafcandexposuretobystanders.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these

components. Do not try to do heavy or awkward steps on your own.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a

risk to users, keep the machine from operating correctly and will void the warranty.

• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or replac-

ing components. If necessary request replacement warning stickers or placards from Nautilus customer service.

• Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.

• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.

Note:FortheBowexMaxTrainer

M5, use the START/ENTER button for all references of the ENTER button.

1. With the machine at the Power-Up Mode screen, push and hold down the Burn Rate/Increase and PAUSE/END buttons for 3 seconds to go into the

Console Setup Mode.

Note: Push PAUSE/END to exit the Console Setup Mode and return to the Power-Up Mode screen.

2. The Console display shows the Sound Settings prompt with the current setting.

3. Push ENTER.

4. The Console display shows the TOTAL RUN HOURS for the machine.

5. Push ENTER.

6. The Console display shows the Software Version prompt.

7. Push and hold down the Burn Rate/Increase and PAUSE/END buttons for three seconds.

8. The Console will display the RESET CONSOLE option.

9. Push ENTER.

NOTICE: WitharesetoftheConsole,allUserProlesettingsandpreviousWorkoutswillbeerasedfromtheConsole.Thisinformationisnot

retrievable after a reset.

10. The Console will display ARE YOU SURE – NO. Push the Burn Rate/Increase button to change to the ARE YOU SURE – YES option.

11. Push ENTER.

The Console will reset to factory settings, and will display the Power-Up Mode screen.

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed in China | © 2014 Nautilus,

Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Bowﬂex, the B logo, and Bowﬂex Max Trainer are trademarks owned by or

licensed to Nautilus, Inc.