10
27. Push the Enter/Start button to continue to the next menu option.
28. The Console display shows the Reset Console prompt. The default option is NO. Push the Pause/Stop button to exit without starting
Reset.
Note: The YES option will reset the System Units, Screen Brightness and Demo Mode to default settings. It does not reset the Run Time
Hours.
Push the Increase/Decrease buttons to change between options (YES/NO).
Push the Enter/Start button to go back to the System Units prompt (first System Menu option).
Push the Pause/Stop button to set the selection and exit the System Menu.
29. The Console will display the Power-Up Mode screen.
Console Setup Mode
To Next Page
Loading...
