5
Moving the Machine
The machine may be moved by one or more persons depending on
their physical abilities and capacities. Make sure that you and others
are all physically fit and able to move the machine safely.
1. Grasp the back of the Stabilizer to carefully tilt the machine forward onto the
transport rollers.
Be aware of the Handlebars and the weight of the machine before
tilting the machine.
2. Push the machine into position.
3. Carefully lower the machine into position.
NOTICE: Be careful when you move the machine. All abrupt motions can affect the computer operation.
Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the
Rail Assembly is slightly o the floor. To adjust:
1. Place the machine in your workout area.
2. Loosen the locking nuts and adjust the levelers until they are evenly
balanced in contact with the floor.
Do not adjust the levelers to such a height that they detach
or unscrew from the machine. Injury to you or damage to the
machine can occur.
3. Tighten the locking nuts.
Make sure the machine is level and stable before you
exercise.
Adjustments
To Next Page
Loading...
