- 3 -
2．Main Features
2.1 Summarization
This BPC PowerGem Plus RT UPS is a single phase in single phase out high
frequency online UPS, it is available as either a 6kVA or 10kVA system. The UPS
Systems can be connected in parallel and adopt N+X redundancy. The number of UPS
modules can be flexibly increased according to the load capacity providing easy
installation and gradual investment.
The PowerGem Plus RT can solve power supply problems, such as blackout,
over-voltage, under-voltage, voltage sudden drop, oscillating of decreasing extent, high
voltage pulse, voltage fluctuation, surge, inrush current, harmonic distortion (THD), noise
interference, frequency fluctuation, etc..
This UPS can be applied to different applications from computer device, automatic
equipment, communication system to industry equipment.
2.2 Functions and Features
1 Phase In/1 Phase Out UPS
1Phase In/1Phase Out high-density UPS system, of which input current is kept in
balance.
Digital Control
This PowerGem Plus RT is controlled by a Digital Signal Processor (DSP); this
increases reliability, performance, self-proteciton, self-diagnostics etc.
Battery Configurable from 16pcs to 20pcs
The battery voltage of the PowerGem Plus RT can be configured to 16pcs, 18pcs
or 20pcs according to the installed battery requirement.
Intelligent Charging Method
The PowerGem Plus RT adopts advanced three-stage charging method—
1st Stage: High, constant current charging mode; to ensure a swift charge back to 90%.
2
nd
Stage: Constant Voltage mode; In order to vitalize battery and make sure batteries
are fully charged.
3rd Stage: Floating mode; with this 3-stage charging method, it extends the life of the
batteries and guarantees fast charging.
LCD Display
With LCD plus LED displays, UPS status and its operational parameters, such as
input/output voltage, frequency & load%, battery% and ambient temperature, etc. are
easy to read.
Intelligent Monitoring Function
Via optional SNMP Card, you may remotely control and monitor the UPS.
To Next Page
