BPW ECO Tronic EBS - Abbreviations

7
1.2 Abbreviations
Abbreviations Explanation Description
2S/2M 2 Sensors / 2 Modulators ABS system with 2 rotational speed sensors and 2 modulators
ABS Anti-Lock Braking System Prevents the locking of braked wheels to maintain lateral grip
ADM Assembly Data Management Software function for storing all important vehicle data
ADR Accord européen relatif au transport
international des marchandises
Dangereuses par Route
European agreement on international transport of dangerous goods by
road
ASC Adaptive Surface Control ABS control that dynamically adapts to road conditions
AUX AUXiliary Additional input / output for sensors or actuators / valves
BPM Brake Performance Monitoring Software function for monitoring brake performance
CAN Controller Area Network
Data bus system, used for controller communication in vehicles, among
others
COLAS
®
+ Lift and lower valve
Valve for lifting and lowering the vehicle body in the case of air-sprung
vehicles
DCV Double Check Valve Anti-compounding valve to prevent simultaneous application of service
brakes and emergency brakes
DTC Diagnostic Trouble Codes Brake system error / warning codes for diagnosis and repair
EBS Electronic Braking System Electro-pneumatic brake system with CAN communication between the
truck and the trailer
ECE R13 Economic Comission for
Europe Regulation No. 13
European regulation No. 13 - Brake systems
ECU Electronic Control Unit Electronic controller
EEPROM Electrically Erasable Programmable
Read Only Memory
ELS
(LSV)
Electronic Load Sensing
Load Sensing Valve
Function for automatically adapting the braking force to the load of the
vehicle
EOLT End Of Line Test End of line system check to ensure correct system installation
EPRV Electro Pneumatic Relay Valve Electro pneumatically piloted relay valve of the EBS
GGVS Gefahrgut Verordnung Straße Act governing the road haulage of hazardous materials
GPI
General Purpose Input AUX option
GPO General Purpose Output AUX option
ILAS
®
-E Integrated Lift Axle Steering EBS controlled lift axle valve
ISO 1185 Standardised interface between truck and trailer for lighting control
ISO 11992
CAN bus communication standard between truck and trailer for brake
control
ISO 7638 Standardised interface between truck and trailer supplying ABS/EBS
systems with power, transferring a signal for a warning device and, if fi tted,
enabling CAN communication as standardised in ISO 11992
LWS Lining Wear System Brake pad wear sensing
LSV Load-Sensing Valve
PPV Pressure Protection Valve
Pressure protection valve that separates the brake and air suspension
circuits
PTC Push To Connect Pneumatic connectors to ease installation
QRV Quick Release Valve
RCM Road Condition Monitoring Software function for recording and evaluating road profi les
REV Relay Emergency Valve Relay valve with emergency brake function
RtR Reset to Ride Height Automatic return to ride height
SAUX Super AUX Installation-optimized possibility for three digital inputs
TA Traction Assist Starting traction control
TrCM Trailer Control Module
Parking and manoeuvring valve with emergency brake function (and
integrated pressure protection)
TRS Trailer R
oll Stability Function that reduces the risk of the trailer rolling over