K
kruegermargaretAug 27, 2025
What to do if my Brady Label Maker is not printing?
- Jjennifer47Aug 27, 2025
If your Brady Label Maker isn't printing on the label, you may be out of ribbon. Load a new ribbon.
To Next PageTo Next PageWhat to do if my Brady Label Maker is not printing?
If your Brady Label Maker isn't printing on the label, you may be out of ribbon. Load a new ribbon.
Why does my Brady BMP 61 not power up?
If your Brady Label Maker doesn't power up, the battery pack might not be charged. Attach the AC adapter to the printer and plug it into an electrical outlet. This will provide immediate power while charging the battery simultaneously.
Why does my Brady Label Maker frequently power OFF?
If your Brady Label Maker frequently powers off, it could be due to a low battery. To fix this, attach the AC Adapter to the printer and plug it into an electrical outlet to supply power and charge the battery.
What to do if the cutter does not cut on my Brady BMP 61 Label Maker?
If your Brady Label Maker cutter does not cut, it is possibly due to adhesive buildup. Clean the cutter blades using a moistened swab from the cleaning kit.
What to do if my Brady Label Maker says 'Cover not closed'?
If your Brady Label Maker displays 'Error - "Cover not closed"', push down firmly on the cover until you hear it latch. It should line up evenly with the printer case.
Why is the print faint on labels from my Brady Label Maker?
If the Brady Label Maker is printing with faint print on labels, the ribbon may not be advancing properly. With the ribbon installed, tension it by rotating the rewind spool (top spool) in a downward direction until all slack is removed. You might also try another ribbon cartridge.
How to fix poor print quality on Brady BMP 61 Label Maker?
If you are experiencing poor print quality with your Brady Label Maker, it could be due to dust or adhesives accumulated on the print head. Try cleaning the print head.
What to do if my Brady BMP 61 displays 'Ribbon not optimized for label type'?
If your Brady Label Maker displays 'Error - "Ribbon not optimized for label type"', replace either the ribbon or label/media. Press [CLEAR/ESC] key to clear the error.
Why is my Brady Label Maker printing no print on the label?
If your Brady Label Maker is not printing anything on the label, it might be because the label or ribbon isn't loaded correctly, or you're out of ribbon. Review the loading instructions for both the ribbon and the media, and load a new ribbon if necessary.
Why do void areas or lines appear on printed text from my Brady Label Maker?
If your Brady Label Maker is producing void areas or lines on printed text, it's likely due to ribbon wrinkling. With the ribbon installed, tension it by rotating the rewind spool (top spool) in a downward direction until all slack is removed. You might also try another ribbon cartridge.
General| Print Technology | Thermal Transfer |
|---|---|
| Resolution | 300 dpi |
| Display | Color LCD |
| Cutter | Automatic |
| Keyboard Type | QWERTY |
| Battery | Rechargeable Li-ION battery |
| Max Print Width | 1.5 inches |
| Label Width Range | 0.25 to 1.5 inches |
| Print Speed (mm/s) | 33.8 |
| Connectivity | USB, Wi-Fi |
| Power Source | Battery or AC adapter |
| Supported Materials | Polyester, vinyl, nylon, and more |
| Memory | 256 MB |
| Material Compatibility | Continuous Tapes, Die-Cut Labels |
