Brady BMP71 - Unpack Your Printer; Register Your Printer

8/12/09 BMP71 Tutorial YXXXXXX
Tutorial
The tutorial is divided into eight lessons, some lessons building on techniques and processes
learned in a previous lesson. For the first time user, it is important to perform the lessons in
order, from first to last.
At the beginning of every lesson, the preferred media (continuous or die cut) is listed, as well
as the part number for that media. For best results, follow the guidelines. The section of the
user’s manual addressing the techniques used in the particular lesson is also listed.
Each lesson provides step-by-step instructions on how to achieve the desired results. Some
lessons present multiple ways to accomplish a certain task. Where appropriate, a graphic
representation displays indicating how your label should look if you followed the steps
correctly.
The following lessons are contained in this tutorial.
Lesson 1. Create a 2-Line Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Lesson 2. Adding Symbols, Subscript, Frame . . . . . . . . . . . . . . . . . . . . . 6
Lesson 3. Adding Serialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Lesson 4. Save and Open a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Lesson 5. Create Multiple Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Lesson 6. Rotating Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Lesson 7. Barcodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Lesson 8. Add Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19