3
Lesson 1. Create a 2-Line Label
BMP71 Tutorial
Lesson 1. Create a 2-Line Label
Media to use: Continuous or M71-31-423
This lesson shows you how to create a simple 2-line label, adding formatting attributes, and
previewing the label before printing. For more information on the techniques used in this
lesson, refer to the Getting Started section (starting on page 35) and the Printing section
(starting on page 79) of the user’s manual.
Entering text
1. On the first line of the label, enter: HOT.
2. To access a new line, press Enter .
3. On the second line of the label, enter: WATER
Changing Font Size
1. Using up/down navigation keys, place the cursor anywhere on the first line.
2. Press Font .
3. Using up/down navigation keys, choose: 20 Pt.
4. Press Enter or OK .
Highlight Text
1. Using up/down navigation keys, place the cursor on the second line.
2. Using left/right navigation keys, place the cursor at the beginning or end of the line.
3. Hold [Shift] while pressing left/right navigation keys, highlight the word: WATER.
To Next Page
Loading...
