19
Lesson 8. Add Areas
BMP71 Tutorial
Lesson 8. Add Areas
Media to use: Continuous (Areas cannot be added to die cut labels.)
This lesson shows you how to add multiple areas to a single label and format each area
separately from the others. For more information on the techniques used in this lesson, refer to
the Formatting, Area section (starting on page 51) of the user’s manual.
Add Areas
1. Clear the screen of all labels.
2. Press Symbol .
3. Choose Prohibition category and press Enter or OK .
4. Choose a No Smoking symbol, then press Enter or OK .
5. Press Area .
6. Choose Add.
7. Press Enter or OK .
The editing screen displays only one area at a time. The newly added area displays as a blank
screen.
8. Press Font .
9. Enter: 36
Notice how the Custom menu option is immediately accessed.
To Next Page
