Braeburn 1220 User Manual

This thermostat requires 24 Volt AC Power or two (2) properly installed
“AA” Alkaline batteries for proper operation. When connecting 24 Volt
AC Power the batteries may be installed as a backup.
For use only as described in this manual. Any other use
will void warranty.
1020
Single Stage Heat / Cool
Conventional and Heat Pump
1 Specifications
2 About Your Thermostat
3 Installation
4 System Testing
5 Setting User Options
6
Operating Your Thermostat
7 Additional Operation Features
8 Thermostat Maintenance
®
Warning
Turn off power to the heating or cooling
equipment before installation.
Attention
For installation by experienced service
technicians only.
1220
Up to 2 Heat / 2 Cool Conventional
Up to 2 Heat 1 / Cool Heat Pump
Read all instructions before proceeding.
This thermostat is compatible with:
 t4JOHMFTUBHFIFBUDPPMDPOWFOUJPOBMBOEIFBUQVNQTZTUFNT
 t$POWFOUJPOBMTZTUFNTVQUPIFBUDPPMPOMZ
t 4JOHMFDPNQSFTTPSIFBUQVNQTZTUFNTXJUIBOBVYJMJBSZIFBUTUBHFPOMZ
 toNJMMJWPMUIFBUPOMZTZTUFNT
Electrical and control specifications:
 t&MFDUSJDBM3BUJOH7PMU"$
 tBNQNBYJNVNMPBEQFSUFSNJOBM
 t"$1PXFSo7PMUT"$
 t%$1PXFS7PMU%$i""w"MLBMJOF#BUUFSJFT*ODMVEFE
 t$POUSPM3BOHF¡o¡'¡o¡$
 t5FNQFSBUVSF"DDVSBDZ¡'¡$
Terminations
 to3D3I0#:8($
 to3D3I0#::&8(8$
1
Specifications
1020W-100-03
Model number is located on back of thermostat
Non-Programmable
Thermostats
Detailed
Installer Guide

Braeburn 1220 Specifications

General

Brand	Braeburn
Model	1220
Category	Thermostat
Language	English

Summary

Specifications

Electrical and Control Specifications

Details electrical ratings, power requirements, control range, and temperature accuracy for the thermostat.

Terminations

Lists the terminal designations for the 1020 and 1220 thermostat models.

About Your Thermostat

Thermostat Display Elements

Identifies and explains the various indicators and display elements on the thermostat screen.

Thermostat Location

Provides guidance on selecting an optimal installation location for the thermostat.

Installation

Installation Steps Overview

Outlines the primary steps for installing the thermostat, including sub-base, power, and wiring.

Wiring Terminations and Configurations

Details terminal functions and provides typical wiring configurations for conventional and heat pump systems.

Set Installer Switches

Installer Switch Settings

Explains the function and settings for installer switches on the back of the thermostat.

Attach Thermostat to Sub-Base

Mounting Procedure

Describes the process of aligning and attaching the thermostat body to the sub-base.

System Testing

Testing Procedures and Warnings

Details the steps for testing system operation and highlights important warnings.

Setting User Options

Advanced User Options

Explains how to access and modify user-configurable settings for thermostat features.

Operating Your Thermostat

System Control and Fan Modes

Describes how to set the system control (HEAT, COOL, OFF, EMER) and fan control (AUTO, ON).

Additional Operation Features

Compressor Protection

Details the automatic compressor protection feature to prevent damage from short cycling.

Thermostat Maintenance

Changing the Batteries

Provides instructions and recommendations for replacing the thermostat's batteries.

Thermostat Cleaning

Offers guidelines for safely cleaning the exterior of the thermostat.

Limited Warranty

Warranty Information and Contact

Outlines the 5-year limited warranty, terms, and contact details for support.