Page 11 Fish Seeker Owner's Manual
Preparing your line
2
Feed the shing line from your shing rod through the tow
point pulley as shown:
3
Aach the line to the swivel. The easiest way to do that is use
an Uni Knot (see below)
How to e a Uni Knot
1. Pass the line through the eye of the
swivel and make a loop with the tag end
2. Wrap the tag end mul�ple �mes
over the line (Recommend 5 or more �mes)
3. Take it out of the loop 4. Pull the tag end and the standing part
4. Make the loop to the desired size by pulling
the standing part. Trim off excess tag end
5. The finished knot looks like this
To Next Page
Loading...