How to fix Brand Developers Fishing Equipment Fish Seeker that does not stay on course?
If your Fish Seeker doesn't stay on course, it might need recalibration or a new heading set. To resolve this, follow the recalibration procedure or the set heading procedure.
What to do if Brand Developers Fishing Equipment motors pulse 4 times when trying to start?
If the motors pulse 4 times when starting, it could be due to a low batet ry, an unset heading, or a missing calibration. Try charging the batet ry, setting the heading, or performing the recalibration procedure.
Why do Brand Developers Fishing Equipment motors pulse 4 times when batet ry is first plugged in?
If the motors pulse 4 times when you first plug in the batet ry, the compass cable might not be plugged in or the connection may be poor. Unplug the batet ry, plug in the compass cable, and then plug the batet ry back in. If that doesn't work, try unplugging and plugging the compass cable back in to improve the connection.
General| Brand | Brand Developers |
|---|---|
| Model | Fish Seeker |
| Category | Fishing Equipment |
| Language | English |
Explains the importance of reading the manual for optimal enjoyment and compliance.
Provides contact details for customer care in Australia and New Zealand.
Advises keeping clear of other beach users and noting currents for safety.
Emphasizes consideration for other beach occupants like children and swimmers.
Lists key guidelines for personal safety during operation.
Offers advice on operating the Fish Seeker safely around boats and other vessels.
Advises checking local regulations for fishing and longlining.
Explains the requirement for marking the Fish Seeker with identification for loss prevention.
Lists the main unit and its included parts like hull, tie rod, and jets.
Details the included battery pack and battery charger.
Describes the trace, tow point pulley, grease, and Magna-ring.
Lists essential equipment like fishing rod, holder, and bait needed for use.
Suggests optional items such as a smartphone app and binoculars for enhanced use.
Details removing the quick link and swivel from the trace.
Instructs feeding the fishing line through the tow point pulley.
Guides on attaching the line to the swivel using a Uni Knot.
Details how to open the Fish Seeker unit by unscrewing the tie rod.
Explains inserting the battery and connecting internal wiring.
Instructs tucking wiring and closing hull sections, then tightening the tie rod to seal.
Provides step-by-step instructions for charging the battery.
Explains observing indicator lights during charging.
Explains controlling the Fish Seeker via a smartphone app.
Describes using the Magna-ring with short, long, and swipe interactions.
Lists specific commands for hatch, run, heading, time, calibration, and stop.
Explains the reasons and timing for recalibrating the unit's compass.
Details the initial steps for calibration using the app or switch sequence.
Instructs rotating the unit in X, Y, and Z axes for calibration.
Explains the final step of placing the unit flat and waiting for calibration completion.
Instructs opening the hatch using the app or Magna-ring.
Details positioning the unit and unwinding the trace for loading.
Guides on baiting hooks and loading them into the bait pod compartments.
Instructs placing the sinker and winding/placing line coils into compartments.
Guides on attaching the main line, securing the tow point pulley, and closing the hatch.
Explains setting the target heading by aiming the unit and using controls.
Provides guidance on run time settings and how to set it using the Magna-ring.
Checks secure hatch closure and pin passage through the trace loop.
Verifies the tow point pulley is attached and secured to the carabiner.
Confirms the reel is set to release line and the rod is secure.
Instructs placing the unit in water and launching with the start command.
Describes the unit traveling out to sea and releasing hooks.
Details the process of retrieving the unit after fishing.
Explains actions after retrieval, like removing fish and releasing undersized ones.
Provides instructions for cleaning the unit after each use.
Advises checking and replacing fishing line and the main seal.
Explains applying marine grease to electrical components and the jet unit.
General advice on operating the unit in water and avoiding damage.
Specific instructions for launching the unit into the water.
Provides guidance on dealing with strong currents and tricky conditions.
Explains how to target fishing spots by adjusting run time and heading.
Addresses issues like not staying on course and motor pulsing on start.
Explains causes for motor pulsing when setting heading or plugging in battery.
Offers solutions for the trace becoming tangled during fishing.
Covers safety precautions like avoiding heat, crushing, and ignition sources.
Provides instructions for charging, storage, and handling leakage.
Advises on keeping the battery clean, not using damaged packs, and professional servicing.
Outlines the terms of the two-year limited replacement warranty.
Lists conditions that apply to and are excluded from warranty coverage.
Explains dispute resolution and provides contact information for warranty inquiries.
To Next Page