Brand Developers Fish Seeker - Install and Connect Battery

Page 13 Fish Seeker Owner's Manual
2
Insert the baery into the front secon of the hull by pushing
the baery into the open cavity unl they are secured in past the
lip, to stop movement when the Fish Seeker is in use.
3
Plug in the wires of the front secon to the wires of the rear
secon. The are 2 connecons, one to connect the compass in
the nosecone (black 6 pin plug), and 1 to connect the baeries
to the PCB (XT60 plug). Always plug the compass connecon in
before the baery connecon.
Never unplug the compass while the baery is connected.
Compass Cable
Baery Cable
Assembling your Fish Seeker