Brand Developers Fish Seeker - Secure Wiring and Seal Unit

Fish Seeker Owner's Manual Page 14
4
Tuck the excess wiring into the unit. Best pracse is to tuck the
compass wiring up into the side of the rear secon, and the
baery wiring into the front secon above the baery.
5
Bring the openings of the front secon and rear secon together,
ensuring the at secons at the boom of both hull secons
meet.
IMPORTANT!
IT IS CRITICALLY IMPORTANT THAT THE SEAL IS CLEAN AND FREE FROM
SAND. DO NOT OPEN OR CLOSE YOUR FISH SEEKER ON THE SAND – OPEN
AND CLOSE IT ON A SAND FREE SURFACE, LIKE A TOWEL OR CHILLY BIN.
Assembling your Fish Seeker