Brand Developers Fish Seeker - Loading the Dropper Rig; Open Bait Pod Hatch; Prepare Unit and Trace; Baiting and Loading Hooks

Page 23 Fish Seeker Owner's Manual
Loading the dropper rig
Step
Acon
1 Select ‘Open Hatch’ feature on the app’s main screen or use the mag
switch to open the hatch. Under the hatch, you will nd the units bait
pod.
2 Lie the unit on its side with the bait pod facing up towards you
5 There are 3 dierent types of compartments; One large sinker
compartment on the le, 5 small line compartments along the top (1
to 5) and 5 medium sized bait compartments along the boom (A to
E).

6 If it is safe to do so (no pets, people, or birds around) the enre trace
can be unwound from the trace rack, laid along the ground, then baited
and loaded into the bait pod. Alternavely, the trace can be wound o
the trace rack and loaded into the bait pod in secons.
5 Remove the hooks from the trace rack and bait them
Loading the Dropper Rig