Page 27 Fish Seeker Owner's Manual
14 Place the trace loop in the pin slot on the hull, then select the ‘close
hatch’ opon in the app or use the mag switch.
15 Clip the trace loop to the quick link on the end of your shing line:
16
IMPORTANT: IF THE NEXT STEP IS NOT FOLLOWED
CORRECTLY YOU WILL LOSE YOUR FISH SEEKER
Secure the tow point pulley to the main body by clipping it to the
carabiner at the end of the e rod. This ensures when the line is
released that the Fish Seeker is sll aached to your shing line. Make
sure you ghten the carabiner lock nut.
Loading the Dropper Rig
To Next Page
Loading...