Branson 6640C - Installing the 3-Point Linkage

• • •
108
INSTALLING 3POINT LINK
a) Attach the lower link to the link hook and insert pin
into hook.
b) Connect Check chain to bracket & Lift link mounting
hole and adjust length.
Refer to instruction of implement for adjusting swing
clearance.
1: LOWER LINK
2: DRAW BAR
3: LIFT LINK
4: CENTER LINK
5: STABILIZER LINK
OPERATIONS & WORK
6640C OPERATORS MANUAL (012612).indd 108 1/30/2012 2:30:57 PM