• • •
111
PRECAUTIONS FOR CONNECTING THE IMPLEMENT
When the PTO shaft is not in use, afx the
safety cover on it.
WARNING
• When engaging or disengaging the implement by
moving the tractor, make sure that no one is allowed
around the tractor or between the implement and the
tractor.
• Engage or disengage the implement on a at and
safe place. Supply proper lighting at all times and
especially at night.
• When engaging a heavy implement, load the weight
on the front to keep the balance of the tractor.
• When adjusting the implement, apply the parking
brake, switch off the engine, and conrm that the
PTO lever is on the “N” position.
• When towing something, make sure to use the draw-
bar.
• Increase the wheel tread on a slope or when towing.
• Depending on the implement, the overall length may
become very long. Pay particular attention to people
or objects nearby when making a turn.
• Do not substitute the balance weight with a person
or anything else. Always use the recommended bal-
ance weight.
• For front loader work, mount an implement on the
rear to keep the balance of the tractor.
• Read the instruction manual of the implement
mounted to the tractor.
OPERATIONS & WORK
[Otherwise]
There is a risk of getting entangled in the
tractor or injured.
6640C OPERATORS MANUAL (012612).indd 111 1/30/2012 2:30:57 PM
To Next Page
Loading...
