Appendix D Accessories Parts List
D - 2 100-413-016 Rev. C
Cup Horn
Permit materials to be treated while isolated in small test
tubes. Cups have transparent plastic bodies
2” diameter 101-147-047
3” diameter 101-147-048
High intensity with flow thru ports-
with water jacket
101-147-046
Continuous
Flow Attach-
ment
Permits continuous processing of
low-viscosity materials with rates
up to 38 liters/hour. Designed pri-
marily for emulsifying, dispersing
and homogenizing, this attachment
will disrupt most cells, with the
exception of the more difficult
types. Materials being treated may
be passed through the attachment
more than once to obtain the desired
results. A water jacket, input, output
and overlow connections are pro-
vided. For use with horns having
outside threads
100-146-171
Sealed Atmo-
sphere Treat-
ment Chamber
Used for batch treatment of infectious materials. Input
and output connections allow filling and emptying with-
out breaking the airtight seal and permit processing with
an inert gas. Stainless steel.
3 - 10ml 101-021-001
6 - 15ml 101-021-002
20 - 50ml 101-021-003
Table D.1 Accessories Parts List
ITEM DESCRIPTION
BRANSON
EDP No.
To Next Page
Loading...
