6
It is recommended to clean the injector, screen and inlet check valve every 6
months to ensure proper system operation.
From time-to-time, your iron filter’s air injection screen can become plugged with lint and de-
bris. This results in poor filter regeneration, which (in-turn) can lead to poor filtration perfor-
mance. Another infrequent issue can be the malfunction of the water inlet check valve, due to
fowling with dirt and debris.
Cleaning and unplugging a dirty air injector or an inlet check valve is an easy process. For a
detailed instructional video, please visit: https://watercontrolinc.com/residential-technical-videos/
MEGAbite Service
Maintenance / Warranty Information
All BrassMaster and BrassMaster Plus water
softeners / filters feature the Assured Perfor-
mance Modular (APM) design. If you experi-
ence a failure of any valve component, the
brass module can be easily removed and re-
placed.
Reference the BrassMaster and BrassMaster
Plus Technical Video Library on our website
(link is provided below) for detailed steps on
how to remove the module. The required
(downloadable) form to have your module
replaced is also located at this site. Please
contact your dealer or WCC for module sup-
port.
Nearly all serviceable
parts lie within the
removable / replaceable
APM module.
This eliminates costly and
time consuming field repairs.
BrassMaster and BrassMaster Plus Technical Video Library:
https://watercontrolinc.com/residential-technical-support/residential-technical-videos
BrassMaster technical videos demonstrate how to set up or remove the control module.
Replacement control modules are available at https://watercontrolinc.com/residential-technical-support/
For factory module support contact:
WCC (Water Control Corporation)
7150 143
rd
Ave NW ● Ramsey, MN 55303
Phone: 1-866-405-1268 ● Fax: 763-427-5665
www.watercontrolinc.com
To Next Page
Loading...
