Why does my Braun CareStyle 7 Pro Iron make intermittent vibrating noises?
If your Braun Iron emits an intermittent noise associated with vibrations, it's because water is being pumped into the boiler. This is normal and no action is needed.
What to do if my Braun CareStyle 7 Pro doesn't switch on?
If your Braun Iron does not switch on, it might not be properly plugged into a mains socket. Make sure the appliance is correctly connected and press the On/Off button.
Why does my Braun Iron leak water from the soleplate?
If you notice water drops from the holes in the bottom of the soleplate of your Braun Iron, it's likely due to water condensation inside the tubes. This usually happens when steam is used for the first time or after a long period of inactivity. To resolve this, press the steam button several times away from the ironing board to eliminate any cold water from the steam circuit.
Why is the steam setting icon on, but no steam comes out of my Braun CareStyle 7 Pro Iron?
If the steam setting icon is permanently on but there is no steam emission from the soleplate of your Braun Iron, the water tank float may be locked, or the water tank is not correctly inserted. To fix this, turn off and unplug the appliance. Remove and empty the water tank, rinse it out, and refill it. Reinsert the water tank and wait until the appliance has cooled down for at least 2.5 hours, then try again. If the problem persists, contact an authorized Braun Customer Service.
Why is steam or water leaking from the closure of my Braun CareStyle 7 Pro Iron?
If steam or water is coming out from the closure of your Braun Iron, the closure is likely not tightened properly. Switch off the appliance, unplug it, and let it cool down for at least 2.5 hours. Unscrew the closure and screw it back on properly. Note that some water can escape when you unscrew the closure.
Why does my new Braun CareStyle 7 Pro Iron smell or smoke when I turn it on?
If you notice smoke or smell the first time your Braun Iron is turned on, it is because some parts have been treated with sealer/lubricant which evaporates the first time the iron heats up. This is normal and will stop when you have used the iron a few times. If the smoke/smell is still present after turning off the appliance, contact an authorised Braun Customer Service.
What to do if my Braun Iron emits a continuous noise associated with vibrations?
If your Braun Iron emits a continuous noise associated with vibrations, it indicates a system error. Unplug the appliance from the mains and contact an authorised Braun Customer Service.
Why is my Braun CareStyle 7 Pro Iron leaking brown fluid?
If brown colored fluid leaks from the soleplate of your Braun Iron, it is because chemical water softeners or additives have been poured into the water tank. Never pour such products into the water tank. Clean the soleplate with a damp cloth and rinse the boiler.
Why does my new Braun CareStyle 7 Pro smoke or smell when I turn it on for the first time?
If you notice smoke or a smell the first time you turn on your Braun Iron, it's normal. Some parts have been treated with sealer/lubricant which evaporates the first time the iron heats up. This should stop after you've used the iron a few times. If the smoke/smell persists after turning off the appliance, contact an authorized Braun Customer Service.
What to do if the icon doesn't reset after refilling the water tank on my Braun Iron?
If the icon on your Braun Iron doesn't reset after refilling the water tank, it could be due to a water float malfunction or incorrect positioning of the water tank. Try emptying the water tank, rinsing it out, and refilling it. Also, ensure the water tank is positioned correctly.
Read instructions, remove packaging, and retain for future reference.
Covers hot surfaces, child safety, cord hazards, water immersion, and choking hazards.
Use only for ironing garments suitable for ironing as per care label.
Ensure appliance is off and unplugged. Fill tank with tap water up to max level.
Notifies when water is low and allows continued ironing for 10-15 minutes.
Follow care label, place iron on rest, plug in, press On/Off button.
Details steam ironing, dry ironing, and steam shot function usage.
Explains Eco, iCare, Turbo, and Boost settings for different fabrics and needs.
Use for steaming hanging clothes in a vertical position with ProSteam mode.
Highlights ergonomic certification and tips for comfortable ironing posture.
Describes automatic shut-off after inactivity and the descaling process.
Empty water tank, clean soleplate and handle with damp cloth. Avoid chemicals.
Details the lock system for safe transportation and storage of the iron and cords.
Provides contact details for De'Longhi Braun Household (Shanghai) Co., Ltd.
Table detailing the content of hazardous substances in product components as per standards.
General| Power | 2400 W |
|---|---|
| Water Tank Capacity | 2 L |
| Heating Time | 2 min |
| Type | Steam Generator Iron |
| Vertical Steaming | Yes |
| iCare Technology | Yes |
| Digital Mode | Yes |
| ECO Mode | Yes |
| Calc Clean System | Yes |
| Power Cord Length | 1.8 m |
| Auto shut-off | Yes |
| Self-cleaning | Yes |
| Anti-drip system | Yes |
| Cord length | 1.8 m |
To Next Page
