EasyManuals Logo

Braun ThermoScan 3 Instruction Manual

Braun ThermoScan 3
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
10
Replacing the battery
The thermometer is supplied with one 3V Lithium cell battery
(type 2032). Insert new battery when the low battery symbol
appears on the display.
The battery door design is
intended to prevent a small
child from easily opening the
battery door to address a
possible choke hazard. Open
the battery compartment by
inserting a narrow pointed object such as a ball point pen or
paperclip into the small hole above the battery door (8). While
pressing into the hole slowly slide back the battery door with
the other hand.
To close battery door align the tabs along the side of the
battery into the battery compartment and slowly slide back
into position until the door clicks into its locked position.
Calibration
This product has been calibrated at the time of manufacture.
If used according to the use instructions, periodic calibration
is not required. If at any time you question the accuracy
of temperature measurements, please contact Consumer
Relations.

Other manuals for Braun ThermoScan 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Braun ThermoScan 3 and is the answer not in the manual?

Braun ThermoScan 3 Specifications

General IconGeneral
Measurement MethodInfrared
Measurement TimeApproximately 1 second
Battery Type2 x 1.5 V AA batteries
HygieneDisposable lens filters
DisplayLCD
Auto Shut-offYes, after 60 seconds
Accuracy±0.2°C (±0.4°F)
Battery LifeApproximately 1000 measurements
Temperature Range34.0°C to 42.2°C (93.2°F to 108.0°F)
MemoryNo

Related product manuals