Braun ThermoScan 3 Instruction Manual

6
1. To turn the thermometer on, push the “start” button (4).
During an internal self-check, the display
shows all segments.
The reading showed on the screen is the
last temperature taken.
Flashing symbol of lens lter will appear if
no lens lter is attached. Temperature can
be taken only if lens lter is mounted on
the probe.
The thermometer is ready to use after two
beeps are sounded and the non-ashing
ear icon appears.
2. Fit the probe (3) snugly into the ear canal,
then push the “start” button (4).
One beep signals normal temperature.
Audio temperature indicator will trigger 2
consecutive beeps when the reading is
equal or higher to 99.5 °F (37.5 °C) and 4
beeps if the reading is equal or higher to
101.5 °F (38.6 °C). The result is shown on
the display (7).
3. Gently pull o the disposable lens lter (2).
Do not use force in removing the
disposable lens lter.
4. Put on a new, clean, disposable lens lter by
snapping into position.
5. Place the protective cap on (1).
The Braun ThermoScan® 3 High Speed
Compact Ear Thermometer turns o
automatically after 60 seconds of inactivity.
The thermometer can be turned o by pressing
and holding the start button for more than 5 seconds.

Braun ThermoScan 3 Specifications

General

Measurement Method	Infrared
Measurement Time	Approximately 1 second
Battery Type	2 x 1.5 V AA batteries
Hygiene	Disposable lens filters
Display	LCD
Auto Shut-off	Yes, after 60 seconds
Accuracy	±0.2°C (±0.4°F)
Battery Life	Approximately 1000 measurements
Temperature Range	34.0°C to 42.2°C (93.2°F to 108.0°F)
Memory	No