Braun ThermoScan PRO 3000 User Manual

Memory mode
The last temperature taken before the thermometer powers down is
stored in memory. To enter the memory mode, press the ©/mem
button.
The last stored temperature is displayed along with the MEM symbol.
Even in memory mode, a new temperature can be taken provided
that the ready symbol 2 9 is shown.
To quit the memory mode, press the ©/mem button again.
LCD light
for easy nighttime reading
Changing the temperature scale
This thermometer is shipped with the Fahrenheit temperature scale
activated. If you wish to switch to Celsius (°C), proceed as follows:
+ Turn on the thermometer.
(If it is already turned on, make sure it is not in memory mode.)
e Press the O/mem button and keep it pressed. Then press and
release the activation button to switch over to the «change
temperature scale» mode.
* By pressing the activation button again, the Celsius scale is
activated, «°C» is displayed on the LCD. Each further pressing
of the activation button toggles the scale between °C and °F.
+ Release the ©/mem button to return to the ready symbol 2 9.
The temperature stored in memory will automatically be converted
to the selected scale when displayed on the LCD.
na
ra

Braun ThermoScan PRO 3000 Specifications

General

Brand	Braun
Model	ThermoScan PRO 3000
Category	Thermometer
Language	English