14 B140 Counting Scale User Instructions
Tare Use to zero off, up to 100% of capacity, an empty container or
weight. Use of tare will reduce the scale’s maximum weight
capacity by the tare value stored.
ON/OFF Use to turn off display for extended battery life or to reset the scale
to normal weighing mode.
EXIT Ignore a keyed value and Exit from input data mode.
ON/OFF/EXIT+PT2 Use to enter calibration mode
ON/OFF/EXIT+PLU1 Use to enter the LED’s brightness setup mode
ON/OFF/EXIT+PLU2 Use to enter the auto-off time setup mode
ON/OFF/EXIT+PLU3 Use to view A/D counts or voltage
ON/OFF/EXIT+PLU4 Use to enter RS232 setup mode
ON/OFF/EXIT+PLU5 Use to enter the date and time setup mode
ON/OFF/EXIT+PLU6 Use to enter ID setup mode
To Next Page
Loading...
