20 B140 Counting Scale User Instructions
5. Press the Clear key to clear the number from the COUNT window. Key in the
lower acceptable count of items. (You can set the upper and lower limit to the
same number to have the alert beeper sound just on that counts.) Press the
Enter key to accept this number …
The scale returns to count mode.
6. Place items to be counted on the scale until you hear the alert beeper …
The count will be within the upper and lower limits you have set.
7. Remove the items from the scale and repeat steps 6 and 7 to weigh the next
batch of items.
3.2.7 Accumulating Counts
The scale can accumulate the counts from different weighments into a total value
stored in memory. Follow these steps to perform accumulations.
1. Follow the different counting methods described in Counting by Sampling on
page 16 or Counting by Entering a Known Piece Weight on page 17 to count
items placed on the scale.
(1) Counting with upper and lower limits can be done while using a tare. After you
have set the piece weight (step 2), place the item to be tared on the scale, press the
Tare key and continue with counting as described.
(2) Upper and lower limits will remain in memory until you reset the limits to 0.
To Next Page
Loading...
