13
5.8) P8.x: calibration division
x = 0 : 1
x = 1 : 2
x = 2 : 5
5.9) P9.x: decimal point in calibration mode
x = 0 : no decimal (x10
0
)
x = 1 : one decimal digit (x10
–1
)
x = 2 : two decimal digits (x10
–2
)
x = 3 : three decimal digits ( x10
–3
)
x = 4 : four decimal digits (x10
–4
)
x = 5 : no decimal point (x10
1
)
5.10) P10.x: Calibration unit
x = 0 : kg as calibration unit
x = 1 : lb as calibration unit
As per the setting of P8, P9 and P10, following table is listed,
Table3: Kg calibration unit:
To Next Page
Loading...
