Brecknell HS300 - Ⅹ.key Definition Summary

25
Ⅹ
.Key Definition summary:
KEY MODE DEFINITION
HOLD
/PRINT
Normal weighing mode
Enter or exit HOLD mode; output the
data as per P4
,P5,P6 setting
Setup mode/Calibration
mode
Shift the flashed position from right to
left
Displaying A/D code or
input voltage mode
No Function
UNIT
Normal weighing mode
Choose weight units, refer P8, P9,
P10, P11 setting and Table3,Table4
.
Setup mode/Calibration
mode
Change the digit
on flashed position
and click this button to add 1.
Displaying A/D code or
input voltage mode
Choose the weight inner code or input
working voltage
to be displayed.
TARE
Normal weighing mode
Tare the weight
Setup mode/Calibration
mode
Confirm the displayed parameters or
input data
, and go to next step
Displaying A/D code or
input voltage mode
Choose filtered or un
-
filtered weight
A/D data
ON/OFF/
ZERO
Normal weighing mode
Zero function or Power off the scale.
Setup mode/Calibration
mode/Displa
ying A/D code
or input voltage mode
Exit and back to normal work mode
ON/OFF/
ZERO
+
HOLD
/PRINT
Normal weighing mode
(more than 3s)
G
o to
Show A/D code or input
working voltage of indicator
mode