MAINTENANCE
28
7 MAINTENANCE
7.1 General
7.2 Maintenance and periodic inspections
The following maintenance scheme shows the
maintenance and periodic inspection that need to be
carried out on the hose pump to guarantee optimal
safety, operation and life of the pump.
WARNING
Disconnect and lock the power supply to
the pump drive before any work is carried
out.
In case the motor is fitted with a frequency
controller and has a single-phase power
supply, wait two minutes to make sure that
the capacitors have discharged.
WARNING
Only use original Bredel parts when main-
taining the hose pump. Bredel cannot
guarantee correct operation and any con-
sequential damage that occurs from the
use of non-original Bredel components.
See also chapters 2 and 3.
To Next Page
Loading...
