Bredel 10 - Surface Treatment; Lubricant Table Pump; Weights

SPECIFICATIONS
51
11.1.3 Surface treatment
• After surface preparation, one layer of two-component acrylate is used for
surface protection. Standard colour is RAL 3011, however other colours are
optional. Contact your Bredel representative for details on surface treatment.
• All galvanised parts have been provided with an electrolytic zinc layer of 15 - 20
microns.
11.1.4 Lubricant table pump
Bredel Genuine Hose Lubricant is registered at NSF: NSF Registration N
o
123204;
Category Code H1. See also: www.NSF.org/USDA.
11.1.5 Weights
Bredel 10 Bredel 15 - 20
Lubricant Bredel Genuine
Hose Lubricant
Bredel Genuine
Hose Lubricant
Required quantity [litres] 0.25 0.5
Should you require additional information with respect to the safety data
sheet, consult your Bredel representative.
Description Weight [kg]
Bredel 10 Bredel 15 - 20
Pump head (inclusive of hose, lubricant and
pump support)
12.2 18.5
Pump support 1.8 2.4
Hose 0.4 0.8
Lubricant 0.3 0.6
Pump cover (complete) 2.3 6.0
Coupling 0.4 0.4
Gearbox GA52... 9.5 9.0
GA53... 10 10
Electric motor 4.5 6.5