27
Before you begin, it is important to check that all components of your smartwatch are
present. Carefully inspect the contents of the packaging to ensure that you have received
everything required for the optimal operation of your device.
1x Smartwatch
1x Charging cable
1x Quick guide
1. Display
2. Short strap with buckle
3. Long strap with holes
4. Charging contacts
5. Optical heart rate and oxygen sensor
6. Function button
7. Strap pins
ATTENTION! Please read all instructions and warnings carefully before using the
smartwatch.
• Check the specications of your smartwatch for water and dust resistance. Avoid
submerging the smartwatch in water if it is not fully waterproof.
• Keep the smartwatch away from heat sources and avoid prolonged exposure to direct
sunlight to prevent overheating and damage to the battery or electronics.
• Avoid strong impacts, drops, or heavy vibrations, as these may damage the display,
break the casing, or disrupt internal components.
• Do not use harsh chemicals, solvents, or abrasive materials to clean the smartwatch.
This may damage the display or casing. Instead, use a soft, slightly damp cloth.
• Only charge the smartwatch using the supplied charger or an alternative approved
by the manufacturer. The use of unsuitable chargers may cause overheating, re, or
damage to the battery.
• Do not attempt to remove or replace the battery. Improper handling may result in re,
explosion, or leakage of hazardous chemicals.
• Keep the smartwatch and its accessories out of the reach of children, particularly small
components that could pose a choking hazard.
English
EN
Component check
Description of parts
Safety warnings
To Next Page
Loading...
