50 Dana Incorporated IMM-0017EN - Installation and Maintenance Manual
12 DISPOSAL
If your product is no longer of use and you wish to dispose of it, refer to the instructions here. If you have any questions regarding
ecological disposal methods, please consult our service points given on the backside of this manuel.
12.1 DISPOSAL OF OIL
Lubricants (oil and greases) are hazardous substances, which can contaminate soil and water.
Collect drained lubricant into suitable receptacles and dispose of it according to the valid national guidlines.
12.2 DISPOSAL OF SEALING
Remove the sealing rings from the gear reducer, and clean them of oil and grease resudies.
Dispose of the sealings as composite material (metal/plastic)
12.3 DISPOSAL OF METAL
Divide up the remainder of the gear reducer into iron, aluminium, non-ferrous havy metal if possible
Dispose of it according to the valid national guidelines.
To Next Page
Loading...