For more information see the section about configuring PTP and BMCA in the appendix.
Video Engine Statistics
Video engine statistics gives you an overview of active engines. The following information
relevant to Video Engine Statistics is displayed in the table below.
Which domain the clock belongs to.
Indicates in what order the BMCA would select the clock.
The grandmaster identity for this clock.
The identity of the clock.
The vendor of the clocks. This is deduced using the IEEE Organizationally
Unique Identifier (OUI) database.
The time delta between the timestamp in the announce messages and the
PTP clock on the interface, at the time of reception.
The timing source for this clock.
The Priority1 value for this clock. (BMCA 1st criteria.)
Indicates to which class the clock belongs to. (BMCA 2nd criteria.)
The announced accuracy. (BMCA 3rd criteria.)
The Priority2 value for this clock. (BMCA 4th criteria.)
Which network interface received announce messages from this clock.
The video engine number.
Specifies the name of the active video flow.
Specifies the video resolution, scan format and frame rate of the
active video flow.
The bitrate of traffic going out of the video engine.
12 VB440 Studio Probe User’s Manual v6.0 © Bridge Technologies Co AS
To Next Page
Loading...