Audio bit depth
Specifies how many bits per sample is in the audio. This field only applies to
2110-30/AES67.
Audio sample rate
Specifies the sample rate for the audio. This field only applies to 2110-30/AES67.
Sender type
Specifies what kind of timing model the transmitter has. This has effect for the
2110-21 measurements.
TR offset mode
Toggle between the default value, based on the signal type, and a specific value,
specified in the next field.
TR offset value
If TR offset mode is not set to the default, then this field will be the TR offset in
use.
VB440 Studio Probe User’s Manual v6.0 © Bridge Technologies Co AS 51
To Next Page
Loading...