To Next PageTo Next PageHow to fix loss of power on essential circuits of Briggs & Stratton Home Generator System?
Loss of power on essential circuits of your Briggs & Stratton Portable Generator can be caused by: * An open generator circuit breaker. Reset the circuit breaker.
Electrical Specifications| rated maximum load current at 25°C/77°F, LP | 83.3 Amps |
|---|---|
| rated AC voltage | 240 Volts |
| phase | Single phase |
| rated frequency | 60 Hertz |
Operating Environment| normal operating range | -20°F (-28.8°C) to 104°F (40°C) |
|---|---|
| output sound level at normal load | 68 dB(A) at 23 ft. (7 m) |
Weight and Dimensions| shipping weight | 575 lb (260 kg) |
|---|
Provides context on safe, efficient, and cost-effective installation procedures.
Guides homeowners and contractors on making informed installation choices.
Helps owners understand installation options for satisfactory and cost-effective results.
Discusses the impact of physical location on wiring and connection costs.
Specifies minimum clearance requirements from combustible materials and for access.
Explains identifying and selecting essential circuits for backup power.
Provides instructions for safely unpacking the generator and transfer switch components.
Details procedures for inspecting components for damage upon delivery.
Lists all items included with the Home Generator System package.
Step-by-step guide to installing the wheel kit onto the generator.
Instructions for connecting the negative battery cable to the generator.
Procedure for adding engine oil, emphasizing its importance for preventing failure.
Guidelines for safely adding unleaded regular gasoline to the fuel tank.
Explains the National Electrical Code requirement for grounding the generator.
Provides step-by-step instructions for starting the generator engine.
Details how to connect electrical loads to the generator safely and correctly.
Describes the 120V AC and 120/240V AC receptacles and their ratings.
Instructions for using the battery float charger to maintain battery charge.
Guidance on calculating wattage and preventing generator overload.
Guidance on operating the power transfer switch and managing loads.
Steps to switch to generator power after a utility power failure.
Tips for managing electrical loads to avoid overloading the generator.
Procedure to revert from generator power back to utility power.
Steps for testing the Home Generator System after installation.
Refers to the engine owner's manual for engine maintenance instructions.
Guidelines for keeping the generator unit clean and dry.
States that no maintenance is required beyond float charging.
Provides methods for cleaning the generator's exterior surfaces.
Instructions for preparing the generator for storage, including cleaning and checking.
Refers to the engine owner's manual for engine storage procedures.
Tips to prevent fuel system issues and advice on fuel stabilizer.
Information needed when contacting Briggs & Stratton Technical Services.
Provides a schematic diagram of the generator's electrical system.
Presents the wiring diagram for the generator's electrical components.
Shows the schematic diagram of the transfer switch.
Illustrates the wiring diagram for the transfer switch.
An exploded view illustrating the generator's components and their assembly.
A list of all part numbers and descriptions for the generator unit.
