Need help?Do you have a question about the BRIGHT BLUE ELECTRAL and is the answer not in the manual?
Covers general safety, electrocution risks, and human failure precautions.
Declares compliance with technical requirements and EC directives.
Lists the components supplied with the equipment.
Details hydraulic connections, cell placement, and temperature sensor installation.
Covers cell power wiring, temperature sensor, and optional controller/detector connections.
Explains how to adjust chlorine production levels via command buttons.
Details Automatic, Manual, and External modes for chlorine production control.
Advises on overnight disinfection and maintaining isocyanuric acid concentration.
Mandates turning off production below 12°C to prevent cell damage.
Describes adjusting chlorine production when the pool is covered.
Triggered by insufficient water flow; system enters standby mode.
Addresses high salt (2A) and low salt (2B) conditions affecting electrolysis.
Warns of potential freezing; suggests circulation adjustments.
Indicates cell nearing end of life or low salinity, reducing production.
Monitors cell operating hours and lifetime.
Outlines copyright, warranty terms, and exclusions.
Lists conditions under which the product warranty is invalidated.
Covers general safety, electrocution risks, and human failure precautions.
Declares compliance with technical requirements and EC directives.
Lists the components supplied with the equipment.
Details hydraulic connections, cell placement, and temperature sensor installation.
Covers cell power wiring, temperature sensor, and optional controller/detector connections.
Explains how to adjust chlorine production levels via command buttons.
Details Automatic, Manual, and External modes for chlorine production control.
Advises on overnight disinfection and maintaining isocyanuric acid concentration.
Mandates turning off production below 12°C to prevent cell damage.
Describes adjusting chlorine production when the pool is covered.
Triggered by insufficient water flow; system enters standby mode.
Addresses high salt (2A) and low salt (2B) conditions affecting electrolysis.
Warns of potential freezing; suggests circulation adjustments.
Indicates cell nearing end of life or low salinity, reducing production.
Monitors cell operating hours and lifetime.
Outlines copyright, warranty terms, and exclusions.
Lists conditions under which the product warranty is invalidated.
General| Brand | BRIGHT BLUE |
|---|---|
| Model | ELECTRAL |
| Category | Swimming Pool Filter |
| Language | English |
To Next Page