BrightSign HD210 - Software Setup and Demo

6
•
•
•
•
•
•
• GPIO (General Purpose Input/Output) button board (HD410, HD810, HD1010, and HD2000
only)
• SoundBridge Remote
• Null modem cable
Step 2: Get the latest BrightSign software
Depending on when you purchased your BrightSign, you may need to download and install the
latest software from the BrightSign web site.
TIP: Watch the BrightSign web site for information on BrightSign software updates so that you
can take advantage of all the latest features.
1 Check your current software version.
a Connect a video monitor to your BrightSign.
b Start BrightSign without an SD card inserted.
c Look for the version number below the Roku logo on your screen.
2 Download the latest software.
a Go to the BrightSign web.
b Click the Software Downloads link.
c Compare the software version number with the number on your BrightSign screen.
d If your BrightSign software is older than the software on the web site, click the Software link
to download the latest software.