BRINKS BHS 2000A - Keypad Programming Details; Data Entry and Location Display; Incrementing Location and Data

ALTERNATING DATA/LOCATION DISPLAY: If the display is indicating tha location address, pressing
the displays the data stored at the location. If the display iS showing the data, then pressing displays
the location address.
INCREMENTING LOCATION: Pressing the repeatedly Will increment the location address upward by
one each time. It will display the location address on each increment.
Pressing the key repeatedly Will increment the locatioh address upward by onfc feach time (just like the
key). Unlike the kfcy it Will display thi data brt each increment.
EXAMPLE: To program the telephone humber (4o8)-55$-l210 ihto the Telephone number 1 location,
enter the following key sequence:
Enter [1] [2] [8] [#]. 128 is the address of the first digit in Phone #1. The display will now read whatever
the first digit is now. if the panel is tifcW, the Setting will be ifeto.
Next enter the data and increment by the key sequence [4][*]. The display will now read 129. Continue the
sequence to the end as follows: [10][*][8][*][5][*}[5][*H5]t*][l][*][2][*][l][*][10][*]. The display will
now read 138.
To review the data enter [ 1 ][2][8][#]; the first digit will be displayed. Then enter [#] again to review each
subsequent digit in turn.
16