BRINKS BHS-3000A - How to Delete an Auxiliary Code

19
How to Add an Auxiliary Code
You can assign an auxiliary user code to the members of your family, or
to people who need temporary access to your home. Housekeepers,
guests, and housesitters can all be given auxiliary codes. You can
assign as many as 91 codes, but for your security, you should limit the
number of auxiliary codes you assign, and delete any codes that are not
in use.
To assign an auxiliary code, do the following:
1. Press the OPTIONS
key.
AUX CODE
2. Press the 3 key.
The ENTER CODE
light blinks.
AUXILIARY
CODES
ENTER
MASTER
CODE
1. Press the OPTIONS
key until the
message window
reads: AUXILIARY
CODES, ENTER
MASTER CODE.
3. Enter the master
user code.
The keypad beeps.
The ENTER USER
# light blinks.
2. Enter the master
user code.
The keypad beeps.
The message
window reads:
ENTER USER #.
4. Enter the number of
the user to whom
you want to assign a
code (1 to 91).
The keypad beeps.
The ENTER CODE
light blinks.
3. Enter the number of
the user to whom
you want to assign a
code (1 to 91).
The keypad beeps.
The message
window reads:
ENTER NEW CODE.
5. Enter the new code.
The keypad beeps.
4. Enter the new code.
The keypad beeps.
6. Test the new code
by turning the
system on, then
using the code to
turn the system off.
5. Test the new code by
turning the system
on, then using the
code to turn the
system off.