Brinly BS-42BH - User Manual

1019911-A
1
BS-42BH-ABS-381-A
BS-381 BS-42BH
This implement is for use with garden tractors
equipped with sleeve hitch. Also, tire chains and
wheel weights are recommended.
Call Customer Service, Toll-Free: 877-728-8224
Important: This manual contains information for the safety
of persons and property. Read it carefully before
assembly and operation of the equipment!
Visit us on the web!
www.brinly.com
38" BOX SCRAPER
MODEL:
BS-381
BS-381-A
BS-42BH
BS-42BH-A
OWNER'S MANUAL
• Assembly
• Installation
• Operation
• Repair Parts
42" BOX SCRAPER

Summary

INTRODUCTION AND SAFETY

CUSTOMER RESPONSIBILITIES

User obligations for proper use, maintenance, and safety.

RULES FOR SAFE OPERATION

Guidelines for safe operation to prevent injury and damage.

PARTS

PARTS: HARDWARE IDENTIFIER

PARTS: CONTENTS OF SHIPPING CARTON

ASSEMBLY

Step 1: Aligning Blade

Aligning the blade with the blade mount plate using carriage bolts.

Step 2: Attaching Weight Mount Brackets

Attaching weight mount brackets to the blade and mount plate.

Step 3: Attaching Weight Support Bracket

Securing the weight support bracket to the weight mount brackets.

Step 4: Aligning Hitch Assembly and Drawbar

Aligning the hitch assembly with the drawbar using hex bolts.

Step 5-A: Attaching Drawbar and Angling Lever

Attaching the drawbar to the blade mount plate and attaching the angling lever.

Step 5-B: Securing Angling Lever

Securing the angling lever with a carriage bolt and hex lock nut.

Step 6: Attaching Side Plates

Attaching side plates to the blade using carriage bolts.

Step 7: Attaching Scarifier Bar

Aligning and securing the scarifier bar assembly with linch pins.

Step 8: Attaching to Tractor Hitch

Attaching the box scraper to the tractor hitch and setting adjustments.

OPERATION AS A BOX SCRAPER AND SCARIFIER

OPERATION AS A REAR BLADE

MAINTENANCE

SERVICE

LIMITED WARRANTY

Brinly BS-42BH Specifications

General

Category	Tractor Accessories
Model	BS-42BH
Type	Box Scraper
Working Width	42 inches
Hitch Type	Category 1
Hopper Capacity	Not Applicable
Material	Steel