==================================================================================================
ASSEMBLY
Step 4
PLOW BOTTOM AND
STANDARD
2219
illustrated here. Secure using:
33
36
919
as illustrated here. First, secure the
standard at the base using:
35
38
Next, insert the 1/2" x 1-1/2" carriage
32
38
Insert one 1/2" x 1-1/2" hex bolt / tracking
28
9
41
1928
into the square nut until tight.
Tighten all fasteners securely.
22
19
33
33
36
36
9
35
32
19
38
38
9
41
28
Side View
Tab
41
9
28
NOTE: The Plow comes partially assembled and attached to the Frog (Part 19).
The Plow parts are not illustrated on this step for better visibility on these assembly illustrations.
10 L-1043-3-BEnglish Manual
To Next Page
Loading...
