EasyManua.ls Logo

BRIO Moderna+ICE CLBL720SCIC - User Manual

BRIO Moderna+ICE CLBL720SCIC
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Bottom Load Water Cooler
& Ice Dispenser
User’s Manual
Model: CLBL720SCIC
+

Questions and Answers

  • E
    Emily SextonAug 2, 2025
    What to do if my BRIO Moderna+ICE CLBL720SCIC is not making ice?
    • T
      Thomas StevensonAug 3, 2025
      If your BRIO Ice Maker isn't producing ice, it might just need some time after setup—about an hour. Ensure the power cord is properly connected to a working outlet. Also, confirm that the dispenser’s back and non-fan-outlet sides are at least 12 inches (30 cm) away from walls, and the fan-outlet side is 19.5 inches (50 cm) from the wall. Finally, check that the black ice-making switch on the back of the dispenser is turned on. If you still have no ice after checking these steps, further assistance may be needed.
  • V
    Victoria RaymondAug 7, 2025
    How to fix hot water not working on BRIO Ice Maker?
    • M
      Melissa DouglasAug 7, 2025
      If the hot water from your BRIO Ice Maker isn't hot, allow 15-20 minutes after setup for the water to heat up. Make sure the power cord is properly connected to a working outlet. Also, ensure that the red heating switch on the back of the dispenser is turned on.
  • N
    nancymasonAug 11, 2025
    Why is the cold water not cold in my BRIO Moderna+ICE CLBL720SCIC Ice Maker?
    • D
      davisrichardAug 11, 2025
      If the cold water from your BRIO Ice Maker isn't cold, allow approximately one hour after setup for the water to cool. Ensure the power cord is properly connected to a working outlet and that the green power switch on the back of the dispenser is On. Also, make sure the dispenser’s back and non-fan-outlet sides are 12 in. (30 cm) from walls, and the fan-outlet side is 19.5 in. (50 cm) from the wall. If the water still isn’t cold, further assistance may be needed.
  • J
    Judy SandovalAug 16, 2025
    What to do if my BRIO Moderna+ICE CLBL720SCIC Ice Maker is not dispensing water?
    • A
      Alec WarnerAug 16, 2025
      If your BRIO Ice Maker is not dispensing water, first check to see if the bottle is empty and replace it with a new bottle if necessary. If the bottle isn't empty, there may still be air in the tank. To resolve this, press and hold the hot and cold water buttons until water begins to flow smoothly and steadily.
  • T
    Tabitha MccartyAug 19, 2025
    Why is my BRIO Moderna+ICE CLBL720SCIC Ice Maker so noisy?
    • T
      Teresa VasquezAug 19, 2025
      If your BRIO Ice Maker is making noise, ensure the dispenser is located on a sturdy, level surface. Also, the heating tube may generate a slight noise, which is normal.
  • B
    Brandon BriggsAug 25, 2025
    What to do if the bottle is leaking on my BRIO Ice Maker?
    • A
      andreaallenAug 25, 2025
      If the bottle on your BRIO Ice Maker is leaking, make sure the bottle is installed correctly. Then, check to see if the bottle is cracked or broken and replace it if necessary.
  • J
    jschultzAug 28, 2025
    How to fix the night light on my BRIO Ice Maker?
    • F
      fdavisAug 28, 2025
      If the night light on your BRIO Ice Maker is not working, make sure the power cord is properly connected to a working outlet. Also, make sure the blue night light switch on the back of the dispenser is turned on.

Summary

Safety Information

Intended Use

Product Features

Touch Panel Description

Operational Specifications

Installation

Determine Installation Location

Steps for placing the dispenser correctly for optimal operation and airflow.

Install Drip Tray and Grid

Guide for assembling the drip tray and grid into the dispenser unit.

Connect a Water Bottle

Instructions for connecting a 3 or 5-gallon water bottle to the dispenser.

Using the Dispenser

Turn the Dispenser On;Off

Steps to power on and off the cooling, heating, and ice-making systems.

Set the Time

Procedure to set the current time on the dispenser's display.

Set Cold Water Temperature

Options to select from three temperature levels for cold water dispensing.

Set Hot Water Temperature

Options to select from three temperature levels for hot water dispensing.

Dispense Ice

Instructions on how to dispense ice from the unit.

Dispense Cold Water

Instructions on how to dispense cold water from the unit.

Dispense Hot Water

Procedure to safely dispense hot water with child-safety lock.

Change the Water Bottle

Cleaning and Maintenance

Cleaning and Draining

Steps for initial cleaning and draining the dispenser before first use.

Sanitizing

Recommended procedure for sanitizing the dispenser every three months.

Removing Mineral Deposits

Steps for removing mineral deposits every six months using a citric acid solution.

Troubleshooting

Warranty

BRIO Moderna+ICE CLBL720SCIC Specifications

General IconGeneral
Storage Capacity350 lbs
Width48 inches
Depth34 inches
Ice Production720 lbs/day
Ice Storage350 lbs
Dimensions (H x W x D)83.5" H x 48" W x 34" D