13
Lower Connectors
• Push and hold the lower
connector release button
to remove the lower
connectors from the
storage slot in the base
or from the seat when
installed.
• To store the lower
connectors, push the lower
connector into the storage
slot in the base until they
click into place.
NOTE: Lower connectors should
always be stored in the base when
not in use.
Recline Angle Indicators
• Correct recline angle is achieved when the green markers on
the recline angle indicators are visible between the two lines.
• Vehicle must be parked on a level surface.
Installing with Base
To Next Page
Loading...
