EasyManua.ls Logo

Britax B-SAFE - Infant Car Seat Capacities

Britax B-SAFE
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Important Notes
Verify that the child seat is securely installed and the harness is
properly adjusted around the child each time the child seat is used.
Discontinue use of this child seat if it has been in a moderate
or severe crash. It is not necessary to replace a car seat after a
minor crash defined by the U.S. National Highway Traffic Safety
Administration (NHTSA) as:
* The vehicle is drivable from the crash site.
* The vehicle door nearest the child seat was not damaged.
* No vehicle occupants were injured.
* There is no visible damage to the child seat.
* The airbags (if present) did not deploy.
Adjust the harness to fit the clothes the child is wearing. Remove
bulky coats and/or jackets before putting the child in child seat.
Cover the child seat when the vehicle is parked in direct sunlight.
Metal parts of child seat could become hot enough to burn a child.
Do not, except as described in this booklet, attempt to disassemble
any part of the child seat or change the way the harness or vehicle’s
seat belts are used.
Do not allow children to play with this child seat.
Do not use anything to raise the child seat off vehicle seat except as
described in these instructions. In a crash, this could cause the child
seat not to perform as intended.
Safety Information
Transportation of Unoccupied Infant Car Seat
Attach this infant car seat to a securely installed base or install
the infant car seat with a vehicle seat belt without the base
even when it is not occupied. In a crash, an unsecured infant
car seat may injure occupants in your vehicle. See pages 12 –
27 for installation instructions.

Table of Contents

Related product manuals