35
• Verify that the harness is not twisted and the child is properly
secured. Check that the:
* Buckle is fastened
* Harness straps are not twisted
* Harness is snug
* Chest clip is level with armpits
IMPORTANT:
* Always pull on the harness after securing the child to make sure
the buckle and harness are fastened securely. If not, the buckle or
adjuster area may be clogged with food, drink, or objects that need
to be removed. See pages 39 – 41 for cleaning instructions.
* Always make sure that the harness is tight before each use, or after
any adjustments.
Handle Position
IMPORTANT: The handle MUST
be in Position 1 when used for
carrying the car seat.
•
The handle can be in any
position (1, 2, 3, or 4) when
installed in the vehicle.
•
To adjust, press and hold
both handle release levers
and rotate the handle to the
desired position.
•
Push and pull on the handle
to be sure it is locked firmly
in position.
Securing Your Child
Carry
position
4
1
3
2
To Next Page
Loading...
